- Coax / UTP cable tester, cable length and mapping, open, short status check
- Measuring Coax cable up to 1.8km, UTP cable up to 200m, measure UTP cable up to 600m with BNC to RJ45 connector (1p)
- Cable loop resistance measurement function
- Calibration function : add the measurements of your own cable data, maximum storable cable data : Coax: 8, UTP: 8
- Built-in rechargeable battery for up to 3 hours in continuous use
- 1.5” high definition OLED display
- Built-in basic cable data, various cable data built-in (Coax: 8 types, UTP: 4 types)
Shop
CT10 : Coaxial and UTP Cable Tester
The CT10 is a coaxial and UTP cable tester and is a “must have” accessory for the professional installer. Operating for up to 3 hours continuously from fully charged (6 hours for coaxial), this extremely useful device will detect faults up to 200m on UTP cable and up to 1.8km (RG-6) for coaxial. The CT10 is very simple to operate with a clear 1.5” high definition display.
SKU: CT10
Categories: CCTV, New Products, Test Equipment
Model Number | CT10 |
---|---|
Display | 1.5” OLED |
Cable Test Type | BNC Coaxial / RJ45 UTP (T568A, 568B) |
Maximum Length - Coax Cable | 10m ~ 1.8km (RG-6) |
Maximum Length – UTP Cable | 5m ~ 200m (UTP) / 150m (STP) |
Minimum Calibration Length | Over 100m recommended |
Error Rate (BNC, RJ45) | ±5% (After Calibration) |
Compatible Connector Type | BNC, RJ45 |
Coaxial Cable Loop Resistance | 300Ω (Max) |
Cable Map Display | OLED (#1-#8) |
Battery Type | 3.7V Rechargeable lithium battery 900mAh |
Temperature / Humidity | -10℃ ~ +50℃ / 0 ~ 80% |
Recharge Port | USB 2.0 MINI-B Type, Over DC5V 600mA (USB charger) |
Full Charge Time / Continuous Use Time | 2h 30m / RJ45 (3h), BNC (6h) |
Case Body / Weight | ABS UL94V-0 / 210g |
Dimensions | 120 (L) x 74 (W) x 33 (D) mm |
Bioaccess Sales Ltd. reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.