A well-designed transmission infrastructure can optimize a security system and, save on installation and operating costs. When transmission over long distances is required ethernet extenders or fiber optics are often implemented.
The use of PoE enables system integrators to easily set up the surveillance cameras without worrying about power distribution. A technology developed to deliver power through CAT5 cable. Ensuring a high quality IP image transmission Genie’s IP transmission devices employ the latest PoE technology, that are web-smart and support fiber optic transmission. With no network configuration required, the connectivity saves installation time and money. Switches allow for local connection to as little as 4 cameras all the way up to 24. What’s more Genie’s network switches have two modes: Default and CCTV. When transmission over long distances is required ethernet extenders or fiber optics are often implemented.
Default mode enables the switch to work as an industry standard PoE switch, with communications between each of the PoE ports. The downlink ports will have maximum bandwidth of 100Mbps and the transmission distance depending on the cable quality, can be up to 100m with PoE (Up to 30W). CCTV mode offers the user a further three unique features to the default industry standard.
The downlink ports will not communicate with the other downlink ports, they will only communicate with the uplink port, this function provides the advantage of further security for example; with three cameras installed outside, and another installed inside – set to default mode where each downlink port could communicate with each other, if an intruder destroys an easily accessible outdoor camera and uses a laptop to connect to the downlink port, they will be able to access all of the cameras and NVR fairly easily. However if enabled to CCTV mode, they won’t be able to access any cameras on the downlink ports because the downlink ports can not communicate with each other, they only transmit data to the uplink port (NVR).
“The switches enable installers to provide combined PoE & Ethernet transmission for a range of our IP systems. With a compact, easy installation design, by providing the customer with two choices so they can utilise on the switch’s capabilities, catering to their needs. Giving them great peace of mind.” – Lee Rhodes, Technical Director
On models such as the IP8ESP CCTV mode can simply activated with a flick of a switch. Turning off communication between the PoE ports but, allowing communication between each downlink port and the 2 Up-Link ports. Extending the transmission distance by up to 250m and increasing power to each camera. Installers and users using the IP16ESP and IP24ESP models benefit from an interface that allows the to see real-time information about their surveillance network, such as device status, PoE consumption data and network bandwidth utilisation. With full control over the PoE ports, cameras can be configured and managed.
What’s more all of Genie’s network switches have gold plated connector pins and 6KV Protection, meaning a much improved connectivity whilst helping to prevent an electrical fire during a power surge. Explore and discover the full benefits of Genie’s network switches range today.